SEW-EURODRIVE Products Repair Services
AES repairs SEW-EURODRIVE frequency inverters, variable frequency drives, servo drives, gearmotor electronics, controllers, HMIs, decentralized drive systems, and related industrial automation equipment used throughout manufacturing and machine-control environments.
SEW-EURODRIVE equipment is often integrated into larger systems involving motors, gear units, machine parameters, communication networks, motion control, and application-specific programming. When a drive begins tripping, a gearmotor stops responding, or a controller loses communication, replacing the component may require more than simply installing a new unit.
AES evaluates the actual failure, repairs the electronics where practical, and tests the equipment before it is returned to service.
Why AES?
Expertise We Offer for SEW Eurodrive equipments
Electronics Repair Services
Electronics Repair Services
Why Repair SEW-EURODRIVE Equipment?
Replacing a SEW-EURODRIVE drive or control component is not always a straightforward swap. The existing equipment may contain application-specific parameters, motor settings, communication configurations, or motion-control programming that are matched to the machine.
SEW-EURODRIVE’s MOVI-C system, for example, combines drive technology, motion control, automation, control technology, and visualization, with controllers communicating with connected inverters and other devices.
Repairing the original equipment can help:
- Reduce replacement costs
- Avoid equipment sourcing delays
- Preserve existing machine settings
- Maintain compatibility with installed motors and gear units
- Support older or discontinued SEW-EURODRIVE equipment
- Reduce programming and commissioning work
- Limit production downtime
- Avoid unnecessary machine modifications
For machinery that is already configured and operating properly, repairing the original component can often be a less disruptive alternative to replacement.
SEW-EURODRIVE Equipment We Repair
AES provides repair and evaluation support for a range of SEW-EURODRIVE drives, decentralized drive systems, controllers, and related industrial electronics.
SEW-EURODRIVE VFD & Frequency Inverter Repair
SEW-EURODRIVE manufactures a broad range of frequency inverters for motor speed, torque, and motion control. Product families include MOVITRAC and MOVIDRIVE, as well as inverter platforms incorporated into the MOVI-C modular automation system.
AES repairs applicable SEW-EURODRIVE frequency inverters experiencing:
- No power
- Repeated drive trips
- Overcurrent or overvoltage faults
- Motor-control problems
- Communication failures
- Display or keypad problems
- Internal power supply faults
- Cooling problems
- Control-board failures
- Power-stage failures
- Intermittent operation
- Fault conditions that will not clear
Repair support may be available for both current and legacy SEW-EURODRIVE inverter platforms. Send the complete model and part number when requesting an evaluation.
SEW-EURODRIVE MOVIDRIVE Repair
MOVIDRIVE application inverters are used for applications requiring motor control and more advanced drive functions. Current MOVIDRIVE products are part of the MOVI-C modular automation system, while older MOVIDRIVE MDX60B/61B units remain part of SEW-EURODRIVE’s documented Generation B product families.
AES can evaluate applicable MOVIDRIVE drives for:
- Drive failure
- No output
- Overcurrent faults
- DC bus problems
- Overvoltage or undervoltage conditions
- Communication failures
- Control-board problems
- Power-component failures
- Cooling or thermal issues
- Keypad or display problems
- Intermittent faults
Repairing an existing MOVIDRIVE unit may allow the machine to retain its established configuration rather than requiring a broader controls upgrade.
SEW-EURODRIVE MOVITRAC Repair
MOVITRAC frequency inverters are used for a variety of industrial motor-control applications. SEW-EURODRIVE’s product portfolio includes current MOVITRAC platforms within the MOVI-C system as well as legacy products such as MOVITRAC MC07B, MOVITRAC LTE-B, and MOVITRAC LTP-B.
AES evaluates applicable MOVITRAC drives for problems including:
- No power
- Motor will not run
- Repeated fault conditions
- Overcurrent problems
- Overvoltage or undervoltage faults
- Communication failures
- Cooling problems
- Control-board failures
- Power-stage problems
- Keypad or display issues
- Intermittent operation
For example, SEW-EURODRIVE’s LTP-B platform includes integrated communications and optional network and encoder interfaces, making the exact model and installed options important when evaluating a failed unit.
SEW-EURODRIVE MOVI-C Repair
MOVI-C is SEW-EURODRIVE’s modular automation system, combining drive technology, motion control, control technology, and visualization. Its product range includes MOVIDRIVE, MOVITRAC, MOVIMOT, MOVIGEAR, MOVIPRO, and MOVI-C CONTROLLER products.
AES can evaluate applicable MOVI-C components experiencing:
- Startup failures
- Drive faults
- Communication problems
- Controller failures
- Network errors
- Power-supply problems
- Internal electronic failures
- Intermittent operation
- Motion-control problems
- I/O or interface issues
Because MOVI-C systems can involve multiple interconnected components, providing the complete model number and any fault information can help identify the correct equipment and repair path.
SEW-EURODRIVE MOVIAXIS Repair
MOVIAXIS is a multi-axis servo drive platform included among SEW-EURODRIVE’s documented Generation B products. These systems can be integrated into machines requiring coordinated motion and multiple controlled axes.
AES can evaluate applicable MOVIAXIS equipment for:
- Axis failures
- No power
- Overcurrent faults
- DC bus problems
- Communication failures
- Feedback or encoder problems
- Power-stage failures
- Control-board faults
- Overheating
- Intermittent operation
- Internal electronic failures
When requesting service for MOVIAXIS equipment, provide the complete module or system identification whenever possible.
SEW-EURODRIVE MOVIMOT Repair
MOVIMOT combines drive electronics with motor and gearmotor applications, providing decentralized motor control. Current MOVIMOT products are included within the MOVI-C modular automation system, while MOVIMOT D is also documented among SEW-EURODRIVE’s Generation B products.
AES evaluates applicable MOVIMOT equipment experiencing:
- Failure to start
- Communication loss
- Motor-control problems
- Overcurrent faults
- Overheating
- Power failures
- Internal electronic faults
- Network problems
- Intermittent operation
- Drive-related fault conditions
Because MOVIMOT equipment combines drive and motor-related functions in a decentralized application, provide the complete unit identification when requesting service.
SEW-EURODRIVE MOVIGEAR Repair
MOVIGEAR is a mechatronic drive system that combines gear unit, motor, and drive electronics into an integrated solution. Current MOVIGEAR products are incorporated into the MOVI-C ecosystem, while MOVIGEAR B is included among SEW-EURODRIVE’s Generation B products.
AES can evaluate applicable MOVIGEAR equipment for:
- No operation
- Communication failures
- Drive faults
- Overheating
- Abnormal noise or vibration
- Motor-control problems
- Internal electronic failures
- Power-stage problems
- Intermittent faults
The exact repair approach depends on the MOVIGEAR model and the source of the failure.
SEW-EURODRIVE MOVIPRO & MOVIFIT Repair
SEW-EURODRIVE also offers decentralized drive and automation products such as MOVIPRO and MOVIFIT. These product families are included among the manufacturer’s documented Generation B equipment.
AES can evaluate applicable units for:
- Power failures
- Communication problems
- Network faults
- Drive-control issues
- Internal electronic failures
- Overheating
- Startup problems
- Intermittent operation
- Control-board failures
Repair availability depends on the exact model, configuration, and condition of the equipment.
SEW-EURODRIVE Controller & Automation Repair
SEW-EURODRIVE’s MOVI-C CONTROLLER products are designed for motion control, automation, gateway, and cyber-physical control applications. They can communicate with higher-level systems through networks such as PROFINET, EtherNet/IP, and Modbus TCP while controlling connected SEW-EURODRIVE devices through the MOVI-C system.
AES evaluates applicable SEW-EURODRIVE controllers and automation electronics experiencing:
- Failed startup
- Communication loss
- Network errors
- I/O problems
- Repeated resets
- Internal power supply faults
- Damaged control boards
- Memory or configuration-related problems
- Intermittent operation
- Communication-interface failures
A controller problem can affect multiple drives and machine functions, making it important to identify the actual source of the failure before replacing an entire control system.
How SEW-EURODRIVE Repairs Are Handled
SEW-EURODRIVE drives and automation products contain multiple electronic and control systems. A fault that appears straightforward from the outside can have a more complex underlying cause.
Depending on the equipment and failure, repair capabilities can include:
- Component-level fault isolation
- Power supply testing
- Control-board troubleshooting
- Power-stage inspection
- Communication circuit testing
- Electronic component replacement
- Cooling-system evaluation
- Drive and control electronics testing
- Functional testing
- Final quality inspection
Every repaired unit is tested before it is released. The equipment is not simply powered on and shipped back. Applicable testing is performed to verify that the repair has addressed the identified problem.
Repair Support for Older SEW-EURODRIVE Equipment
SEW-EURODRIVE equipment can remain in service for years as part of established production machinery.
When an older drive or decentralized control component becomes difficult to source, replacing it with a newer platform may require:
- Parameter conversion
- Wiring changes
- Control-program updates
- Communication changes
- Motor or feedback modifications
- Machine recommissioning
- Changes to mounting or installation arrangements
SEW-EURODRIVE’s documentation continues to identify numerous Generation B products, including MOVIDRIVE MDX60B/61B, MOVITRAC MC07B, MOVITRAC LTE-B/LTP-B, MOVIAXIS, MOVIGEAR B, MOVIMOT D, MOVIFIT, MOVIPRO, and other legacy platforms.
AES evaluates applicable legacy SEW-EURODRIVE equipment to provide another option before making larger changes to an established machine.
Send the complete model number, part number, and serial information whenever possible. A clear photo of the equipment nameplate can also help with the evaluation.
Industries We Support
SEW-EURODRIVE equipment is used throughout industrial applications involving motor control, material movement, automated machinery, and production systems.
AES supports SEW-EURODRIVE equipment repair for:
- Packaging and converting
- Material handling
- Conveyor systems
- Automotive manufacturing
- Food and beverage processing
- Machine tools
- Plastics processing
- Printing and paper
- Warehousing and logistics
- Automated assembly
- Production machinery
- Process manufacturing
- OEM machinery
- General manufacturing
Why Companies Use AES for SEW-EURODRIVE Repair
Companies choose AES for SEW-EURODRIVE repair because they can have existing drive and automation equipment evaluated before committing to a replacement or larger machine modification.
AES provides:
- Over 30 years of industrial repair experience
- Component-level electronic repair capabilities
- Repair support for multiple SEW-EURODRIVE technologies
- Worldwide shipping and logistics support
- Two-year warranty on repairs
- ISO 9001:2015 certified quality processes
- Typical turnaround of 8–12 days
- Free equipment evaluations
- Straightforward repair quotes
- Direct customer support
- Emergency repair service availability
Get started with our simple, proven AES Repair Process
Once we have received your item for repair, we will receive the item in our system.
1Our quoting specialists will evaluate your item and determine the parts and labor necessary to complete the repair.
2Following your approval, we will get to work on your repair. One of our repair technicians will troubleshoot the problem(s) with the item.
3To ensure the highest level of quality throughout the repair process, we comply with ISO 9001:2015 Certified QMS standards, and an ESD program.
4Once the repair is complete, we safely package your item and prepare the item for delivery or shipment.
5
Get in Touch
Connect with one of our friendly experts today, & let’s get the conversation started! AES is here to help!
Frequently Asked Questions About SEW-EURODRIVE Products Repair
What SEW-EURODRIVE products does AES repair?
AES repairs and evaluates applicable SEW-EURODRIVE frequency inverters, VFDs, servo drives, decentralized drive systems, controllers, and related industrial automation electronics. Products may include MOVIDRIVE, MOVITRAC, MOVIAXIS, MOVIMOT, MOVIGEAR, MOVIPRO, MOVIFIT, and MOVI-C equipment. Send the complete model number to confirm repair availability.
Can AES repair SEW-EURODRIVE MOVIDRIVE drives?
Yes. AES can evaluate applicable MOVIDRIVE equipment for power failures, drive faults, communication problems, control-board issues, power-stage failures, overheating, and other electronic problems.
Does AES repair SEW-EURODRIVE MOVITRAC drives?
Yes. Applicable MOVITRAC equipment can be evaluated for problems including drive trips, overcurrent faults, communication failures, power problems, control-board failures, cooling issues, and intermittent operation.
Can AES repair MOVI-C equipment?
AES can evaluate applicable MOVI-C drive, controller, and automation components for electronic and operational failures.
Does AES repair older SEW-EURODRIVE equipment?
Many older SEW-EURODRIVE products can be evaluated for repair. This can be particularly useful when replacement equipment is difficult to source or moving to a newer platform would require changes to machine wiring, programming, parameters, communications, or configuration.
Can SEW-EURODRIVE decentralized drives be repaired?
Applicable decentralized drive products, including certain MOVIMOT, MOVIGEAR, MOVIPRO, and MOVIFIT equipment, can be evaluated for repair. Availability depends on the exact model and condition of the unit.
How long does SEW-EURODRIVE equipment repair take?
Typical AES repair turnaround is approximately 8–12 days, depending on the equipment, failure, parts requirements, and repair complexity. Emergency repair options are also available.
Are SEW-EURODRIVE repairs covered by a warranty?
Yes. AES repairs are backed by a two-year warranty and undergo applicable functional testing and final quality checks before return.
